Advertisement
Quick Links
Technical Support:
Telephone
(818)772-9100
(800) 545-6900
Fax
(818)772-9120
Technical Support Hours:
8:00 AM to 5:00 PM on Weekdays.
Write To:
Gefen Inc.
c/o Customer Service
20600 Nordhoff Street
Chatsworth CA 91311
www.gefen.com -- support@gefen.com
Gefen Inc. reserves the right to make changes in the hard ware, packaging and any
accompanying doc u men ta tion without prior written notice.
4x1 HDTV Switcher is a trademark of Gefen Inc.
ASKING FOR ASSISTANCE
Notice
© 2005 Gefen Inc., All Rights Reserved
Advertisement
Related Manuals for Gefen HDTV-441
Summary of Contents for Gefen HDTV-441
- Page 1 Chatsworth CA 91311 www.gefen.com -- support@gefen.com Gefen Inc. reserves the right to make changes in the hard ware, packaging and any accompanying doc u men ta tion without prior written notice. 4x1 HDTV Switcher is a trademark of Gefen Inc.
-
Page 2: Table Of Contents
Introduction Features Panel Desciptions Connecting and Operating the 4x1 HDTV Switcher RMT4-IR Installation Specifi cations Warranty TABLE OF CONTENTS... -
Page 3: Introduction
Our Commitment Gefen will always offer the fi nest quality product at the best possible price. Included in that price is a lifetime of support from a team of outstanding engineers. The ex•tend•it 4x1 HDTV Switcher allows four HDTV DVI devices to be switched easily in to one HDTV DVI compatible monitor or projector. -
Page 4: Features
Features • Switches easily between any four HDTV sources • Maintains 480i, 480p, 720p, 720i, and 1080i, 1080p resolutions • Extends any DVI compliant device by regenerating the DVI signal • Maintains highest DVI single link video resolution • Supports DDWG standard for DVI compliant monitors •... -
Page 5: Panel Desciptions
PANEL DESCRIPTIONS Indicates which IR eye input is selected... -
Page 6: Connecting And Operating The 4X1 Hdtv Switcher
DVI cable. The contact closure port is wired using a CAT5 cable is shield. Pins 1-4 to the shield cause the unit to switch to inputs 1-4. Pins 5-8 are feedback letting you know what has been selected. -
Page 7: Rmt4-Ir Installation
RMT4-IR Installation 1. Remove battery cover from the back of the RMT4-IR remote. 2. Verify that dip switches 1 & 2 are in the down (OFF) position. 3. Insert the battery, hold the battery so that you can see the positive side facing up. The side that is not marked must be facing down. -
Page 8: Specifi Cations
SPECIFICATIONS Video Amplifi er Bandwidth ... 1.65 GHz Input Video Signal ... 1.2 volts p-p Input DDC Signal ... 5 volts p-p (TTL) Single Link Range ... 1920 x 1200 DVI Input/Output Connector Type ... DVI-D Power Consumption ... 15 Watts (max.) Power Supply ... -
Page 9: Warranty
If equipment fails because of such defects and Gefen Inc. is notifi ed within one (1) year from the date of shipment, Gefen Inc. will, at its option, repair or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifi...