Advertisement
Quick Links
Advertisement
Related Manuals for Gefen HD-441AA
Summary of Contents for Gefen HD-441AA
- Page 1 4x1 HD Analog Audio Switcher U S E R M A N U A L www.gefen.com...
- Page 2 Chatsworth CA 91311 www.gefen.com -- support@gefen.com Gefen Inc. reserves the right to make changes in the hard ware, packaging and any accompanying doc u men ta tion without prior written notice. 4x1 HD Analog Audio Switcher is a trademark of Gefen Inc.
-
Page 3: Table Of Contents
Introduction Features Panel Descriptions Connecting and Operating the 4x1 HD Analog Audio Switcher RMT4-IR Installation RS232 Interface Specifi cations Warranty TABLE OF CONTENTS... -
Page 4: Introduction
Our Commitment Gefen will always offer the fi nest quality product at the best possible price. Included in that price is a lifetime of support from a team of outstanding engineers. The ex•tend•it 4x1 HD Analog Audio Switcher allows four HDTV devices and analog audio to be switched easily in to one HDTV compatible monitor or projector and analog receiver. -
Page 5: Features
Features • Switches easily between any four HDTV sources • Switches easily between any four analog audio sources • Maintains 480i, 480p, 720p, 720i, 1080i, and 1080p resolutions • No loss of audio quality • Extends any DVI compliant device by regenerating the DVI signal •... -
Page 6: Panel Descriptions
PANEL DESCRIPTIONS Input Indicator Connects to IR DVI Out LEDs extender RCA Audio Contact Closure IR eye Control RS232 Audio In 1 Audio In 2 Audio In 3 Audio In 4 Interface HD in 1 HD in 2 HD in 3 HD in 4 5VDC power supply... -
Page 7: Connecting And Operating The 4X1 Hd Analog Audio Switcher
Connecting and Operating the 4x1 HD Analog Audio Switcher How to Connect the 4x1 HD Analog Audio Switcher to your devices 1 Connect the supplied HDMI cables from the HDTV sources into the HD Switcher HD inputs. Connect the supplied Mini Din Stereo to RCA cables from the Analog Audio sources into the HD Switcher Audio inputs. -
Page 8: Rmt4-Ir Installation
1. Remove battery cover from the back of the RMT4-IR remote. 2. Verify that dip switches 1 & 2 are in the down (OFF) position. 3. Insert the battery, hold the battery so that you can see the positive side facing up. The side that is not marked must be facing down. -
Page 9: Rs232 Interface
Binary Table Input Binary 0011 0001 0011 0010 0011 0011 0011 0100 Terminal Settings Bits per second ... 19200 Data bits ... 8 Parity ... None Stop bits ...1 Flow Control ... None RS-232 Interface... -
Page 10: Specifi Cations
SPECIFICATIONS Video Amplifi er Bandwidth ... 1.65 Gbps Input Video Signal ... 1.2 volts p-p Input DDC Signal ... 5 volts p-p (TTL) Single Link Range ... 1920 x 1200 Video Output Connector Type ... DVI-I 29 pin Female (digital only) Video Input Connector Type ... -
Page 11: Warranty
If equipment fails because of such defects and Gefen Inc. is notifi ed within one (1) year from the date of shipment, Gefen Inc. will, at its option, repair or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifi...