Advertisement
1. Remove battery cover from the back of the RMT4-IR remote.
2. Verify that dip switches 1 & 2 are in the down (OFF) position.
3. Insert the battery, hold the battery so that you can see the positive side facing up. The
side that is not marked must be facing down.
4. Test the RMT4-IR remote by pressing ONLY one button at a time. The indicator light
on the remote will fl ash once each time you press a button. WARNING: Do not press
multiple buttons simultaneously and do NOT press buttons rapidly. These actions will
cause the remote to reset and steps 1-4 will have to be repeated.
Note: The RMT4-IR ships with two batteries. One battery is required for operation, the
second battery is complimentary.
*** Note: Two-button remote RMT2-IR is shown instead of four-
button RMT4-IR here. Aside from the number of buttons,
appearance and operation are identical between the two
devices. ***
RMT4-IR INSTALLATION
The optional IR extender allows you to
relocate your 4x1 HD Digital Audio Switcher
and still have IR control of the 4x1 HD Digi-
tal Audio Switcher
5
Advertisement
