Switching The Projector On/Off; Power Cord; Power Indicator - Panasonic PT-AE7000E Operating Instructions Manual

Switching the projector on/off

Switching the projector on/off

Power cord

Use the power cord included to prevent removal of the power cord and make sure it is fully inserted into
the projector.
Make sure the <MAIN POWER> switch is on the <OFF> side before connecting the power cord.
Use the power cord included and ensure that it is fully inserted.
For power cord handling details, see "Read this first!". (
■
Connecting
Fully insert until the tabs on the left
and right make a click sound.

Power indicator

The power indicator indicates the power status.
Check the status of the power indicator <ON (G) / STANDBY (R)>
before operating the projector.
Indicator status
No illumination or flashing
Red
Green
Orange
28 - ENGLISH
Main power is switched off.
Power is switched off. (Standby mode.)
Lit Press the <POWER> button to start projection.
* Does not operate when the lamp indicator and temperature indicator are flashing.
Power is switched off (standby mode) and the [POWER ON LINK] is set to
Flashing [ON] in the VIERA Link settings.
For details about [POWER ON LINK], see [POWER ON LINK] (
The projector is preparing to project.
Flashing
Projection starts after a brief pause.
Lit Projecting.
Preparing to switch off the power.
Lit
The power is switched off after a while. (Changes to the standby mode.)
The <POWER> button is switched on again in the power off preparation mode.
Flashing
Preparing to project. Projection starts after a brief pause.
pages 6 to 13)

■
Disconnecting
Pull out while pushing on the tabs on
the sides.
Status
Power indicator
page 78).
