[H-Area Position]; [V-Area Position]; [Left Masking Area]; [Right Masking Area] - Panasonic PT-AE7000E Operating Instructions Manual

[LENS CONTROL] menu

[H-AREA POSITION]

You can move the frame area horizontally, such as
aligning the right or left frame edge to the screen
edge.
Moving left
For example, when projecting an overscanned 16:9
aspect movie at a 4:3 aspect ratio on a 4:3 aspect
screen, you can adjust the horizontal discrepancy
between the screen position and the video display
position.
16:9 projection area
4:3 video display position

[V-AREA POSITION]

You can move the frame area vertically, such as
aligning the top or bottom frame edge to the screen
edge.
Moving
downward
For example, when projecting an overscanned 16:9
aspect movie at a 2.35:1 cinema scope screen movie
on a 2.35:1 cinema scope screen, you can adjust the
vertical discrepancy between the screen position and
the video display position.
16:9 projection area
2.35:1 cinema scope screen size
72 - ENGLISH
Moving right
4:3 screen
Moving upward
2.35:1 cinema scope screen
size video display position

[LEFT MASKING AREA]

You can place a blank (mask) area in the left side edge on
the screen.
Less
Setting range: 0 to 70
z

[RIGHT MASKING AREA]

You can place a blank (mask) area in the right side edge on
the screen.
Less
Setting range: 0 to 70
z

[UPPER MASKING AREA]

You can place a blank (mask) area in the upper side edge
on the screen.
Less
Setting range: 0 to 70
z

[LOWER MASKING AREA]

You can place a blank (mask) area in the lower side edge
on the screen.
Less
Setting range: 0 to 70
z
Note
If it is set to [0], each masking function will be invalid.
z
The [MASKING AREA] function will be invalid when
z
adjusting the [COLOUR MANAGEMENT] or [SPLIT
ADJUST] settings and displaying the [TEST PATTERN]
or [WAVEFORM MONITOR], and no signal is detected.
More
More
More
More