Panasonic PT-AE7000E Operating Instructions Manual page 50

[PICTURE] menu
4) Press the <ENTER> button.
[CURSOR] menu
z
(C) are displayed.
CURSOR
ENTER
Screen
Note
In some cases you may be unable to adjust when the
z
very edge point of the projection area is selected.
You can create a profile only when [ADJUSTMENT
z
MODE] is set to either [CURSOR] or [RGBCMY]. A profile
cannot be created from both adjustments.
White, gray and black cannot be edited.
z
5) Press the ▲▼ buttons to select a menu
item and the ◄► buttons to adjust each
item level.
[COLOUR]
[TINT]
[BRIGHTNESS]
The default setting for each item is [0].
z
After adjusting, the post-adjustment colour (D)
is displayed.
CURSOR
ENTER
Screen
6) Press the <ENTER> button.
[PROCESSING] message is displayed for a few
z
seconds and the result is stored in [LOG].
You can store up to 8 logs under [LOG]. Press
the <MENU> or <RETURN> button to return
to the previous menu. Repeat from step 3) to
store more adjustments.
7) Press the <RETURN> button or <MENU>
button twice.
This returns you to the [COLOUR
z
MANAGEMENT] menu.
50 - ENGLISH
(B) and the colour selected
DEFAULT
COLOUR 0
SELECT TINT 0
BRIGHTNESS 0
RETURN
Adjust the vividness of the
colour.
Setting range:
z
−30 to +30
Adjust the colour tone.
Setting range:
z
−30 to +30
Adjust the brightness of the
colour.
Setting range:
z
−20 to +20
DEFAULT
COLOUR 0
SELECT TINT 0
BRIGHTNESS 0
RETURN
●
Adjusting the selected colour (when
[RGBCMY] is selected for [ADJUSTMENT
MODE])
Select the colour from 6 different colour types ([RED],
[GREEN], [BLUE], [CYAN], [MAGENTA], [YELLOW]) and
adjust [COLOUR], [TINT] and [BRIGHTNESS].
1) Press the ◄► buttons to select [RGBCMY]
in [ADJUSTMENT MODE].
COLOUR MANAGEMENT
PROFILE
ADJUSTMENT MODE
START ADJUSTMENT
LOG
2) Press the ▲▼ buttons to select [START
ADJUSTMENT] and press the <ENTER>
button.
3) Press the ▲▼ buttons to select your
desired colour and press the <ENTER>
button.
RGBCMY ADJUSTMENT
RED
GREEN
BLUE
CYAN
MAGENTA
YELLOW
Menu (B) and the base colour (C) is displayed.
z
RED
DEFAULT
COLOUR
ENTER
SELECT
TINT
BRIGHTNESS
RETURN
Screen
NORMAL
RGBCMY
0
0
0