Menu Navigation; Navigating Through The Menu - Panasonic PT-AE7000E Operating Instructions Manual

Menu navigation

Navigating through the menu

■
Operating procedure
Press
1) Press the < MENU> button on the remote
control or in the controls of the projector.
The main menu is displayed.
z
PICTURE MODE
PICTURE CONTRAST
BRIGHTNESS
COLOUR
POSITION
TINT
LANGUAGE COLOUR TEMPERATURE
SHARPNESS
DYNAMIC IRIS
3D SETTINGS
WAVEFORM MONITOR
SPLIT ADJUST
LENS CONTROL
ADVANCED MENU
PICTURE MEMORY
OPTION
2) Press the ▲▼ buttons to select main
menu items.
Select the item to be adjusted from the 6 items
z
[PICTURE], [POSITION], [LANGUAGE], [3D
SETTINGS], [LENS CONTROL] and [OPTION].
The selected item is indicated with a yellow cursor,
and the submenu is displayed on the right hand
side.
H-POSITION
PICTURE V-POSITION
ASPECT
POSITION WSS
OVER SCAN
LANGUAGE KEYSTONE
SCREEN AREA MEMORY
3D SETTINGS
LENS CONTROL
OPTION
3) Press the <ENTER> button.
The submenu is displayed, and submenu items
z
become selectable.
4)
NORMAL
0
Note
0
0
Pressing the <RETURN> or <MENU> button when the
z
0
menu screen is displayed returns to the previous screen.
0
Depending on the signal input, some items may not be
z
SIMPLE
ON adjustable and some functions may not be usable.
Some items can be adjusted even if a signal is not input.
z
See
z
■ Returning adjusted values to default
settings
Press the <DEFAULT> button on the remote control
to return the settings/adjustment values to default
settings.
Press
This function differs depending on the screen
displayed.
●
When the submenu screen is displayed:
0
their default settings.
0
●
16:9
When individual adjustment screen is displayed:
ON
Only the item currently being adjusted is returned
0
to its default settings.
0
Note
All settings cannot be simultaneously returned to default
z
settings.
Some items do not return to default settings even you
z
press the <DEFAULT> button. Please set those items
individually.
The vertical bar above the bar scale on the individual
z
adjustment screen indicates the default setting.
The position of the vertical bar varies depending on the
input signal.
Menu navigation
Press the ▲▼ buttons to select the
submenu item you wish to alter, then
press the to switch settings/adjust.
For items where the setting is switched or that have
z
a bar scale, the menu screen disappears and only
the selected item (individual adjustment screen) is
displayed, as shown in the diagram below.
H-POSITION
For items that are only names, pressing the
z
<ENTER> button displays the next screen and
advanced settings can be performed.

page 38 for the submenu items.
The submenu items displayed are returned to
H-POSITION
Default setting
Current setting
0
0
0
ENGLISH - 37