Table of Contents
Advertisement
User's Guide
Ink Supply Unit Codes
Epson recommends the use of genuine Epson ink supply units. Epson cannot guarantee the quality or reliability of
non-genuine ink. The use of non-genuine ink may cause damage that is not covered by Epson's warranties, and
under certain circumstances, may cause erratic printer behavior. Information about non-genuine ink levels may
not be displayed.
The following are the codes for genuine Epson ink supply units.
Note:
❏ Ink supply unit codes may vary by location. For the correct codes in your area, contact Epson support.
❏ Not all ink supply units are available in all regions.
For Europe
Size
XXL
XL
L
Visit the following website for information on Epson's ink supply unit yields.
http://www.epson.eu/pageyield
For Australia and New Zealand
Black
M02XXL, M02XL, M02
For Asia
Black
T9701, T9691, T9681
Ink Supply Unit Handling Precautions
Read the following instructions and Important Safety Instructions (paper manual) before replacing Ink Supply Unit.
Handling precautions
❏ Store ink supply unit at normal room temperature and keep them away from direct sunlight.
❏ Epson recommends using the ink supply unit before the date printed on the package.
❏ For best results, store ink supply unit packages with their bottom down.
❏ After bringing an ink supply unit inside from a cold storage site, allow it to warm up at room temperature for at
least 12 hours before using it.
Replacing an Ink Supply Unit and Other Consumables
Black
T9661
T9651
T9641
79
Advertisement
Table of Contents
