Fitting And Removal Of Base : Prolite Xu2492Hsu - Iiyama ProLite XUB2492HSU-B1 User Manual

FITTING AND REMOVAL OF BASE : ProLite XU2492HSU

 Put the monitor on a stable surface. The monitor may cause injury or damage if it
CAUTION
falls or is dropped.
 Do not give a strong impact to the monitor. It may cause damage.
 Unplug the monitor before removal or installation to avoid electric shock or damage.
<Installation>
Put a piece of soft cloth on the table beforehand to
prevent the monitor from being scratched. Lay the
monitor fl at on a table with front face down.
Hold the monitor and push the Stand until it clicks and
is secure.
Hold the monitor and push the Stand-Base until it clicks
and is secure.
<Removal>
Put a piece of soft cloth on the table beforehand to
prevent the monitor from being scratched. Lay the
monitor fl at on a table with front face down.
Press and hold the hooks inside, and pull the Stand-
Base.
Press the hook and remove the stand.
Hook
Hook
BEFORE YOU OPERATE THE MONITOR 7
Stand
Stand-Base
DP