Observa Telecom TD851W User Manual page 42

Broadcast SSID: When wireless clients survey the local area for wireless networks to
associate with, they will detect the SSID broadcast by the Router. To broadcast the Router's
SSID, select "Enable". If you don't want to broadcast the Router's SSID, select "Disable".
After configuration, click Apply Changes button to save your changes.
Note:
1. These settings are only for more technically advanced users who have a sufficient knowledge
about wireless LAN. They should not be changed unless you know exactly what will happen
for the changes on your Access Point.
2. After configuration, you need to click the Save button appeared on the left panel so that your
configuration can still take effect after the Router reboots.
4.2.3.5 WPS
Choose "Setup→WLAN→WPS" menu, and you will see the Quick Secure Setup screen (shown
in Figure 4-21). Wi-Fi Protected Setup (WPS) is a simple way to establish the connection between
the wireless client and access point. You don't need to select the encryption method and
encryption key. You just need to input the correct PIN or start PBC and press the WPS button on
the router to set the WPS.
Disable WPS: Select to disable WPS function.
WPS state: Display the current WPS state.
Self PIN Number: Displays the PIN number of the Router. You can click the Regenerate PIN
button to generate a new PIN number.
TD851W 150Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-21
36
Back to LED Explanation