Bandwidth Control; Control Settings; Rule List - TP-Link TL-WR940N User Manual

Chapter 4

4. 13. Bandwidth Control

4. 13. 1. Control Settings

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Bandwidth Control
3. Configure the bandwidth as needed and click Save.
The values you configure for the Egress Bandwidth and Ingress Bandwidth should be
less than 100,000Kbps. For optimal control of the bandwidth, please select the right
Line Type and consult your ISP for the total egress and ingress bandwidth.
• Enable Bandwidth Control
can take effect.
• Line Type - Select the right type for you network connection. If you are not sure,
please consult your ISP.
• Egress Bandwidth
• Ingress Bandwidth

4. 13. 2. Rule List

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Bandwidth Control
rules.
• Description - This is the information about the rules such as address range.
• Egress Bandwidth
WAN port. The default is 0.
> Control Settings.
- Check this box so that the Bandwidth Control settings
- The upload speed through the WAN port.
- The download speed through the WAN port.
> Rule List, and you can view and configure the Bandwidth Control
- This field displays the max and min upload bandwidth through the
52