Wps - TP-Link TL-WR940N User Manual

Chapter 4
• Name (SSID)
• Mode - The current wireless working mode.
• Channel Width
• Channel - The current wireless channel.
• MAC Address
• WDS Status
• WAN - This field displays the current settings of the WAN, and you can configure them
on the Network >
• MAC Address
• IP Address
or 0.0.0.0 if the IP Address is assigned dynamically and there is no internet
connection.
• Subnet Mask
• Default Gateway
Dynamic IP as the internet connection type, click
obtain new IP parameters dynamically from the ISP or release them.
• DNS Server
• Traffic Statistics - The router's traffic statistics.
• Received (Bytes)
• Received (Packets)
• Sent (Bytes)
• Sent (Packets)
• System Up Time
reset.
Click Refresh to get the latest status and settings of the router.
4. 2.

WPS

WPS (Wi-Fi Protected Setup) can help you to quickly and securely connect to a wireless
network. This section will guide you to add a new wireless device to your router's
network via WPS.
Note:
The WPS function cannot be preformed if the wireless function of the router is disabled. Please make sure the wireless
function is enabled before configuration.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to WPS.
3. Follow one of the following three methods to connect your client device to the router's Wi-Fi
network.
- The SSID of the router.
- The current wireless channel width.
- The physical address of the router.
- The status of WDS connection.
WAN page.
- The physical address of the WAN port.
- The current WAN (Internet) IP Address. This field will be blank
- The subnet mask associated with the WAN IP Address.
- The Gateway currently used is shown here. When you use
- The IP addresses of DNS (Domain Name System) server.
- Traffic in bytes received from the WAN port.
- Traffic in packets received from the WAN port.
- Traffic in bytes sent out from the WAN port.
- Traffic in packets sent out from the WAN port.
- The length of the time since the router was last powered on or
Renew or Release here to
16