TP-Link TL-WR940N User Manual page 25

Chapter 4
• Subnet Mask - Enter the subnet mask in dotted-decimal notation provided by your
ISP. Normally 255.255.255.0 is used as the subnet mask.
• Default Gateway - Enter the gateway IP address in dotted-decimal notation provided
by your ISP.
• MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet
networks is 1500 Bytes. It is not recommended that you change the default MTU size
unless required by your ISP.
• Primary/Secondary DNS
decimal notation provided by your ISP.
PPPoE/Russia PPPoE
If your ISP provides PPPoE connection, select
• User Name/Password
These fields are case-sensitive.
• Confirm Password
password you entered is correct.
• Secondary Connection
an extra connection type, select
connection.
• WAN Connection Mode
• Connect on Demand
automatically after a specified inactivity period (Max Idle Time) and be re-
established when you attempt to access the internet again. If you want to keep
your internet connection active all the time, please enter 0 in the
- (Optional) Enter one or two DNS addresses in dotted-
- Enter the user name and password provided by your ISP.
- Enter the Password provided by your ISP again to ensure the
- It's available only for PPPoE connection. If your ISP provides
Dynamic IP
- In this mode, the internet connection can be terminated
PPPoE/Russia PPPoE.
or Static IP to activate the secondary
Max Idle Time
20