Bandwidth Control; Control Settings; Rule List - TP-Link WR850N User Manual

Chapter 4
• Gateway - This is the IP address of the gateway device that allows for contact between
the Router and the network or host.
• Interface - This interface tells you whether the Destination IP Address is on the LAN &
WLAN (internal wired and wireless networks), or the WAN (Internet).
• Click Refresh to refresh the data displayed.
4 11

Bandwidth Control

4 11 1

Control Settings

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Bandwidth Control.
3. Configure the bandwidth as needed and click Save.
The values you configure for the Egress Bandwidth and Ingress Bandwidth should be
less than 100,000Kbps. For optimal control of the bandwidth, please select the right
Line Type and consult your ISP for the total egress and ingress bandwidth.
• Enable Bandwidth Control
can take effect.
• Egress Bandwidth
• Ingress Bandwidth
4 11 2

Rule List

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Bandwidth Control
• Description - This is the information about the rules such as address range.
- Check this box so that the Bandwidth Control settings
- The upload speed through the WAN port.
- The download speed through the WAN port.
and you can view and configure the Bandwidth Control rules.
Configure the Router
48