Firmware Upgrade; Factory Defaults - TP-Link TL-WR940N User Manual

Chapter 6
• Enable - Turn on/off Ping Watch Dog.
• IP Address - The IP address of the target host where the Ping Watch Dog Utility is
sending ping packets.
• Interval - Time interval between two ping packets which are sent out continuously.
• Delay - Time delay before first ping packet is sent out when the router is restarted.
• Fail Count - Upper limit of the ping packets the router can drop continuously. If this
value is overrun, the router will restart automatically.
6. 6. 3.

Firmware Upgrade

TP-Link is dedicated to improving and richening the product features, giving users
a better network experience. We will release the latest firmware at TP-Link official
website. You can download the latest firmware file from the
www.tp-link.com and upgrade the firmware to the latest version.
1. Download the latest firmware file for the router from our website www.tp-link.com.
2. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
3. Go to System Tools
4. Click Browse to locate the downloaded firmware file, and click Upgrade.
6. 6. 4.

Factory Defaults

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
> Firmware Upgrade.
Support page of our website
108