Table of Contents
Advertisement
1 Press the [REC] button to start recording to
the SD card.
This camera recorder has two [REC] buttons.
Any of the [REC] buttons can be used to start/
stop recording by default.
The tally lamp lights up in red during recording.
Zoom Operation
0
(A P49 [Zoom Operation] )
Adjusting the Focus
0
(A P50 [Focus Operation] )
Memo :
If both the slots are loaded with recordable cards
0
in the factory default, pressing the [REC] button
starts recording only to the media in the selected
slot.
When [Main Menu] B [System] B [Record Set]
B [Slot Mode] is set to "Dual", recording can be
performed simultaneously to the cards in both
the slots.
(A P74 [Dual Rec] )
The tally lamp can be turned off in [System] B
0
[Tally Lamp].
(A P113 [ Tally Lamp ] )
2 Check the most recently captured images.
Press the [C.REVIEW/4] button to activate
0
the Clip Review function. The most recently
captured images are played back on the LCD
monitor and viewfinder screen.
After playback, the camera recorder returns
0
to standby mode (STBY).
(A P73 [Viewing Recorded Videos
Immediately (Clip Review)] )
Memo :
[Clip Review] is assigned to the [C.REVIEW/4]
0
button in factory default.
[Clip Review] can also be assigned to other user
0
buttons.
(A P39 [Assignment of Functions to User
Buttons] )
Selecting System
Definition, File Format and
Video Format
You can select the resolution of the recorded
videos (4K, HD, SD, or Web), file format for
recording/playback, and the video recording
format on this camera recorder.
Setting the Record Format Menu
1 Set [System], [Format], [Resolution],
[Frame Rate] and [Bit Rate] in [Main Menu]
B [System] B [Record Set] B [Record
Format].
2 Set each of the items.
A [Selecting a System Definition] (A P 47)
B [Selecting a File Format] (A P 48)
C [Selecting a Video Format] (A P 48)
D [Selecting the Aspect Ratio of SD Videos]
(A P 49)
3 After setting is complete for all items, press
the [LOLUX/3] button.
The recording format is switched.
0
A "Please Wait..." message appears on the
0
screen during switching.
Selecting a System Definition
There are four different definitions for selection.
4K:
0
Records in 4K resolution (3840x2160)
HD:
0
Records in HD (High Definition) resolution
(1920x1080 or 1280x720)
SD:
0
Records in SD (Standard Definition) resolution
(720x480 or 720x576)
Web:
0
Records in resolution (1440x1080, 960x540,
720x480, 720x576, or 480x270) suitable for web
distribution
You can select a definition for the recorded images
from the following items under [System].
4K:
0
Records in 4K quality for both slots A and B.
HD:
0
Records in HD quality for both slots A and B.
SD:
0
Records in SD quality for both slots A and B.
HD+Web:
0
Records in HD quality for slot A, and Web quality
for slot B.
(A P74 [Recording Simultaneously at Two
Different Definitions] )
Basic Shooting Procedures
47
Advertisement
Table of Contents
