JVC GY-HM200E Instructions Manual page 153

o Switching from a web browser
A You will see a message indicating "It is
necessary to change the camera mode to
"Remote Edit Mode". Change the mode."
on the web browser.
It is necessary to change the camera
mode to "Remote Edit Mode".
Change the mode.
Cancel Change
.
B Tap (click) [Change] to switch the camera
to the Remote Edit mode.
Remote Edit Mode
Exit
.
o Switching from the camera
A "Change to Remote Edit Mode?" is
displayed on the display screen of the
camera unit.
B Select [Change] and press the Set button
(R) to switch to the Remote Edit mode.
Change to
Remote Edit Mode?
Change
Cancel
Remote Edit Mode
Exit
.
Memo :
When the menu or status is displayed, display
0
of the confirmation screen will be put on hold.
If the menu is displayed on the camera recorder,
0
close the menu.
If the status is displayed on the camera recorder,
0
close the status display.
Pressing the Set button (R) on the camera
0
A
recorder while in the Remote Edit Mode ends
the Remote Edit Mode forcibly and switches to
the Camera mode.
When FTP upload via the camera unit is
0
B currently in progress, switching to the Remote
Edit mode is disabled.
4 Select the Metadata Edit mode.
Select the [Metadata] tab.
5 Select the clip to rewrite the metadata.
A list of the recorded clips appears on the
0
[Clip List] screen.
Tap (click) the clip for which you want to
0
rewrite the metadata.
4
5
A
B
.
Memo :
You can switch the displayed slot using the [Slot
0
A] and [Slot B] tabs.
You can use the [J-30] or [K+30] tab to jump to
0
the previous or next 30 clips on the list.
2015-01-24 T14:47:15
2015-01-24 T14:47:15
2015-01-24 T14:47:28 2015-01-24 T14:47:28
2015-01-24 T14:47:37
2015-01-24 T14:47:37
2015-01-24 T14:47:53
2015-01-24 T14:47:53
Editing Metadata K
153