Selecting System Definition, File Format And Video Format - JVC GY-HM600U Instructions Manual

Selecting System
Definition, File Format and
Video Format
You can select the system definition (HD or SD),
file format for recording/playback and the record
format for video images on this camera recorder.
Memo :
Make a selection in [Main Menu] B [Record
0
Format].
Selecting a System Definition
Select the system definition in [System].
There are two different definitions for selection.
HD:
0
Records in HD (High Definition) quality.
SD:
0
Records in SD (Standard Definition) quality.
44
Selecting a File Format
Select a file format in [Format].
There are four file formats for selection.
QuickTime(MPEG2):
0
QuickTime file format (.MOV)
MP4(MPEG2):
0
MP4 file format
AVCHD:
0
AVCHD file format
QuickTime(H.264):
0
QuickTime format (.MOV)
Memo :
The available options vary as follows depending
0
on the [System] setting.
For "HD":
0
QuickTime(MPEG2), MP4(MPEG2),
AVCHD,QuickTime(H.264)
For "SD":
0
QuickTime(H.264)
Selecting a Video Format
Select a [Record Format] from the list of formats.
0
The selectable [Frame & Bit Rate] changes
according to the settings of [System], [Format],
and [Resolution].
The recording bit rate (video) is 50 Mbps in
0
"XHQ", 35 Mbps VBR in "UHQ" and "HQ", and
18.3 Mbps (25 Mbps in the case of 1080i) CBR
in "SP".
If [Format] is set to "AVCHD", the recording bit
0
rate (system rate) is 24 Mbps VBR in "HQ"
mode, and 17 Mbps VBR in "SP" mode.