Safety Information - ElectrIQ EIQ-284KMB Quick Start Manual

SAFETY INFORMATION

• Read these instructions - All the safety and operating instructions should
be read before this product is operated.
• Keep these instructions - The safety and operating instructions should be
retained for future reference.
• Heed all warnings -All warnings on the appliance and in the operating
instructions should be adhered to.
• Follow all instructions - All operating and usage instructions should be
followed.
• Do not use this equipment near water, or in humid environments - The
appliance should not be used near water or moisture e.g. in a wet
basement or near a swimming pool.
• Clean only with a dry cloth. Do not use solvents or petroleum based
fluids.
• Do not block any ventilation openings.
• Do not install near any heat sources such as radiators, stoves or other
apparatus (including amplifiers) that produce heat.
• Do not tamper with the supplied plug. This plug is a BS1363 standard
plug.
• Protect the power cord from being walked on or trapped, particularly at
the plug and at the point where it exits from the appliance.
• Only use attachments/accessories specified by the manufacturer.
• Use only with a cart, stand, tripod, bracket or table specified by the
manufacturer or sold with the apparatus. When a cart or stand is used,
use caution when moving it to avoid any injuries or damage from it tipping
over.
• Unplug the apparatus during lightning storms or when unused for long
periods of time.
• Refer all servicing to qualified personnel. Servicing is required when the
apparatus has been damaged in any way, such as power supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus or it has been exposed to rain or moisture, it does not operate
normally or has been dropped.
• Please keep the unit in a well-ventilated environment.
• The monitor should only be connected to a mains power supply as rated
on the back of the equipment.
• To prevent overload, do not share the same power supply socket with too
many other electronic components.
2