AEG BSE874320M User Manual page 13

5. Set a steam heating function and the
temperature.
6. If necessary, set the function:
Duration or: End Time
The steam appears after
approximately 2 minutes. When the
appliance reaches the set
temperature, the signal sounds.
When the water drawer is running
out of water, the signal sounds and
the water drawer needs to be refilled
to continue the steam cooking as
described above.
The signal sounds at the end of the
cooking time.
7. Turn off the appliance.
8. Empty the water drawer after the
steam cooking is completed.
Refer to the cleaning function: Tank
emptying.
CAUTION!
The appliance is hot.
There is a risk of burns.
Menu
Menu item
Assisted Cooking
Cleaning
Basic Settings
Submenu for: Cleaning
Submenu
Quick
Normal
Intense
Descaling
Rinsing
Tank emptying
9. After Steam Cooking steam can
condensate on the bottom of the
cavity. Always dry the bottom of the
cavity when the appliance is cool.
.
Let the appliance dry fully with the door
open. To speed up the drying you can
close the door and heat up the appliance
with function: True Fan Cooking at
temperature 150°C for approximately 15
minutes.
6.2 Menu - overview
Application
Contains a list of automatic programmes.
Contains a list of cleaning programmes.
Used to set the appliance configuration.
Description
Pyrolytic cleaning.
1 h for a low degree of dirt.
Pyrolytic cleaning.
1 h 30 min for a usual degree of dirt.
Pyrolytic cleaning.
3 h for a high degree of dirt.
Procedure for cleaning the steam generation circuit
from residual limestone.
Procedure for rinsing and cleaning the steam genera-
tion circuit after frequent use of the steam functions.
Procedure for removing the residual water from the wa-
ter drawer after use of the steam functions.
ENGLISH
Menu
170°C
Options
13