Table of Contents
Advertisement
Alarm key (AL)
Press and hold for 3 seconds to enter the alarm setting mode.
•
In alarm setting mode, press to toggle between the following settings:
•
1. high humidity alarm
2. low humidity alarm
3. high temperature alarm
4. low temperature alarm
In manual setting mode, press to go back to normal display mode
•
LCD Screen:
The LCD screen is split into 4 sections displaying the time/ date, temperature, relatively humidity and memory status.
Time reception icon
(for WWVB time)
Buzzer-on icon
Memory data display
(showing no. of sets of unread
data stored in memory)
Outdoor data showing outdoor
sensor information is selected.
MANUAL SETTINGS:
In normal display mode, press and hold the SET key for 3 seconds to enter the manual setting mode for the following:
a. LCD contrast setting
b. Time zone setting
c. Daylight saving time on/ off setting
d. Radio-controlled time reception on/ off setting
e. 12/ 24 hour format setting
f.
Time setting (Hour and Minute)
g. Calendar setting (Year, Month and Day)
h. Temperature unit (°F/ °C) setting
i.
Relearning or removing a remote temperature/humidity sensor
j.
Number of sets of outdoor channel to be saved to the memory of the indoor weather station
Time
5
Outdoor transmitter identification
number
Calendar display
Temperature reading in
ºF/ ºC
Relative humidity reading in
RH%
Advertisement
Table of Contents
