Table of Contents
Advertisement
HOW TO INSTALL AND REPLACE BATTERIES IN THE WEATHER STATION
The indoor weather station uses 3 x AA, 1.5V batteries. To install and replace the batteries, please follow the steps below:
SIZE AA LR6
SIZE AA LR6
SIZE AA LR6
HOW TO INSTALL AND REPLACE BATTERIES IN THE REMOTE TEMPERATURE/HUMIDITY SENSOR
The remote temperature/humidity sensor uses 2 x
AAA 1.5V batteries. To install and replace the
batteries, please follow the steps below:
1. Remove the battery cover
2. Insert the batteries, observing the correct polarity
(see battery compartment marking)
3. Replace the battery cover on the unit
BATTERY CHANGE:
User shall replace batteries of the indoor weather station when the battery low indicator is displayed at the LCD. If user
does not replace the batteries, working error may result.
Note:
After changing the batteries in the indoor weather station there is no need for user to reset the indoor weather station.
•
In fact, the indoor weather station can remember all remote temperature/humidity sensor information and sequence
as per the pervious set-up. However, user may be required to reset the desired LCD contrast, alarm on/off condition
and the clock (by re-entering the date and time manually or simply wait for the WWVB time signal).
The "average" value display for particular channel will only be calculated from the data after battery change.
•
User needs to carry out the re-learning of the particular remote temperature/humidity sensor after replacing batteries
•
in the remote temperature/humidity sensor. See "LEARNING/ REMOVING A SENSOR (CHANNEL)" for the
procedures of relearning a remote temperature/humidity sensor.
It is recommended to replace the batteries in all units on an annual basis to ensure optimum accuracy of these units.
•
Please participate in the preservation of the environment. Return used batteries to an authorized depot.
1. Insert finger or other solid object in the space at the bottom center of the
battery compartment and lift up to remove the cover.
2. Insert batteries observing the correct polarity (see marking).
3. Replace battery compartment cover.
Battery
compartment
2
Battery cover
Advertisement
Table of Contents
