Manual Settings - La Crosse Technology WIRELESS WEATHER STATION Instruction Manual

Wireless 868 mhz weather station
Hide thumbs Also See for WIRELESS WEATHER STATION:
Table of Contents

Advertisement

Physikalisch Technische Bundesanstalt Braunschweig which has a time deviation of less
than one second in one million years. The time is coded and transmitted from Mainflingen
near Frankfurt via frequency signal DCF-77 (77.5 kHz) and has a transmitting range of
approximately 1,500 km. Your radio-controlled Weather Station receives this signal and
converts it to show the precise time in summer or wintertime. The quality of the reception
depends greatly on the geographic location. In normal cases, there should be no reception
problems within a 1,500 km radius around Frankfurt.
Once the outdoor temperature is displayed on the Weather Station after initial set-up, the
DCF tower icon in the clock display will start flashing in the upper left corner. This indicates
that the clock has detected that there is a radio signal present and is trying to receive it.
When the time code is received, the DCF tower becomes permanently lit and the time will be
displayed.
If the tower icon flashes, but does not set the time or the DCF tower does not appear at all,
then please take note of the following :
Recommended distance to any interfering sources like computer monitors or TV sets
is a minimum of 1.5 - 2 meters.
Within ferro-concrete rooms (basements, superstructures), the received signal is
naturally weakened. In extreme cases, please place the unit close to a window and/or
point its front or back towards the Frankfurt transmitter.

MANUAL SETTINGS:

The following manual settings can be done in the setting mode:
64

Advertisement

Table of Contents
loading

Table of Contents