Table of Contents
Advertisement
DAYLIGHT SAVING TIME ON/OFF SETTING
Note:
The function of day nighttime saving on/off is only applicable to specific area in United States using
•
WWVB time sources.
The "dS off" setting is used for area with no day nighttime saving within US while "dS On" settings is for those
•
area having day night time saving within US.
1.
Press and hold the SET key until the digits "Lcd" starts flashing.
2.
Press shortly the SET key two times to enter the daylight saving time setting. The digit "dS" will be flashing.
3.
Use the Plus and Minus key to set the daylight saving time function to "On" or "Off" mode.
4.
Press the Mode or Alarm key to confirm and go back to the normal display mode.
TIME RECEPTION ON/OFF SETTING:
In areas where reception of the WWVB time signal is not possible, the WWVB time reception function can be turned OFF.
The clock will then work as a normal Quartz clock. (Default setting is ON).
1.
Press and hold the SET key until the digits "Lcd" starts flashing.
2.
Press and release the SET key three times to enter the time reception time setting. The digit "rEc" will be flashing.
3.
Use the Plus and Minus key to set the time reception function to on or off mode.
4.
Press the Mode or Alarm key to confirm and go back to the normal display mode.
Note:
If the Time Reception function is turn OFF manually, the clock will not attempt any reception of the WWVB time as long as
the Time Reception OFF function is activated. The time reception icon and the "WWVB" icon will not be displayed on the
LCD
Digits flashing
Digits flashing
7
Advertisement
Table of Contents
