Page 2
The warranty does not apply to any product where the serial number has been removed or obliterated. The warranty also does not apply to any product sold by a reseller to an end user outside of the country where the reseller is located unless (i) Christie has an office in the country where the end user is located or (ii) the required international warranty fee has been paid.
IR extender cable Product documentation For installation, setup, and user information, see the product documentation available on the Christie Digital Systems USA Inc. website. Read all instructions before using or servicing this product. 1. Access the documentation from the Christie website: •...
Learn how to install and configure the display panel and the remote control. Christie recommends that the ambient temperature around a display panel or a video wall remain constant and below 40 degrees Celsius (104 degrees Fahrenheit). Ensure the display panel or video wall is kept away from heating and air conditioning vents.
The wall must be capable of supporting three times the weight of the display panel, or be reinforced. To ensure the mounting brackets clear any protrusions on the rear of the panel, Christie recommends using spacers with a minimum height of 6.35 mm (.25 in).
Image retention is not covered under warranty. To prolong the life of your display panel, follow these recommendations. • Operate the display panel within its rated ambient environment. Christie recommends an operating temperature of 5 to 40 degrees Celsius (41 to 104 degrees Fahrenheit), with a maximum relative humidity of 75%.
3. Adjust the slidebar until the image stabilizes. Adjusting the phase (VGA sources) Christie recommends that you adjust the phase after you adjust the clock. The Phase control adjusts the phase of the pixel sampling clock relative to the incoming signal. Adjust the phase when an image continues to show shimmer or noise after the Clock settings are optimized.
Troubleshooting Learn about common issues and their solutions. The FHD553-XU display panels do not require any routine maintenance. There are no user-serviceable or replaceable parts. Do not attempt to repair or replace any system component yourself unless you are a qualified, factory trained-technician, as doing so voids the product warranty.
Specifications Learn about the product specifications. Due to continuing research, specifications are subject to change without notice. Physical specifications Learn the physical specifications for the FHD553-XU panel. Description Details Dimensions (W x H x D) 1213.5 mm x 684.3 mm x 98.5 mm (without handle) 1213.5 mm x 684.3 mm x 105.7 mm (with handle)
Specifications Power requirements Learn the power requirements for the FHD553-XU panel. Power consumption specifications do not include the power consumption of a control computer or a device connected to the OPS module of the display panel. Description Details Power supply AC 100V - 240V (50/60 Hz), 3.0 Amps, maximum...
Page 50
Corporate offi ces Worldwide offi ces Christie Digital Systems USA, Inc. Australia Germany Republic of South Africa United Kingdom Cypress ph: +61 (0) 7 3624 4888 ph: +49 2161 664540 ph: +27 (0)11 510 0094 ph: +44 (0) 118 977 8000...