Kyocera 1102RX3NL0 Operation Manual page 187

Troubleshooting > Troubleshooting
E
Message
Enter Account
Error.Power off
F###
Error.Power off
F000
Exceeded Max. output
Press GO
F
Message
Format SD card.
H
Message
High temperature.
Adjust room temp.
Checkpoints
―
―
―
―
Checkpoints
Is the SD Card formatted by this
machine?
Checkpoints
—
8-18
Corrective Actions
An account code must be entered.
This message is displayed if you try
to print from the operation panel
(e.g. printing a status page or using
the Job Retention function) when
the Job Accounting function is
enabled.
Turn the power switch off and then
back on again. If this message still
remains, turn the power switch off,
and contact your service
representative or authorized service
center.
The printer controller and operation
panel cannot exchange data. Turn
the power switch off and then back
on again. If this message still
remains, turn the printer off and
unplug it from the mains power
supply. Then contact your service
representative or authorized service
center. See the back page of this
manual for the relevant phone
numbers.
The printing count exceeded the
acceptable count restricted by Job
Accounting. Cannot print any more.
This job is canceled. Select the
[GO] key.
Corrective Actions
Perform [Format] on this machine.
Corrective Actions
Adjust the temperature and the
humidity of your room.
Reference
Page
―
―
―
page 7-11
Reference
Page
page 6-18
Reference
Page
―