Checking Details Of Application - Kyocera 1102RX3NL0 Operation Manual

Appendix > Optional Equipment
2

Checking Details of Application

1
Activate the application.
1
Select [Details] of the application you will start using, and select the [►] key.
2
[▲] [▼] key > [Official] > [OK] key > [OK] key
To use the application as a trial, select [Trial] without entering the license key.
3
Enter the license key > [OK] key
NOTE
Select the [▲] or [▼] key to enter a number.
Select the [◄] or [►] key to move the cursor left or right.
Some applications do not require you to enter a license key. If the license key entry screen does not
appear, go to Step 7.
4
Select [Yes].
NOTE
If you started the Thin Print option and entered the license key, turn the power OFF/ON.
Display the screen.
1
[Menu] > [▲] [▼] key > [Op functions] > [►] key
2
Enter the administrator ID and select the [OK] key.
NOTE
Enter an ID consisting of between 1 and 16 numbers.
Select the [▲] or [▼] key to enter a number.
Select the [◄] or [►] key to move the cursor left or right.
The factory default settings for the administrator ID is 4000.
3
Enter the administrator password and select the [OK] key.
NOTE
Enter a password consisting of between 0 (no settings) and 16 numbers.
Select the [▲] or [▼] key to enter a number.
Select the [◄] or [►] key to move the cursor left or right.
The factory default settings for the administrator password is 4000.
9-6