BenQ PL460 Installation Handbook page 29

Function
Control of all displays through
Local Area Network (LAN)
Number of daisy chained displays
The number of displays you can loop out serially depends on the resolution and type of the
input signal. Refer to the following table for the recommended and maximum number of
displays for different daisy chains.
Input signal
DVI-I (Analog)
DVI-I (Digital signal)
DP
If connection of more than the maximum number is required, use appropriate signal splitters to ensure stable
signal transmission, and you can loop up to 100 displays for PL460, PH460, PH550 and 225 displays for PL490,
PL550, PL552, PL553, SL490, SL550.
The design of ID setting is different by models.
PL490/PL550/PL552/PL553/SL490/SL550: 15 x 15
PL460/PH460/PH550: 10 x 10
Cables required for each display
RJ45 cable
Recommended number of display
4
16
PL series: 9
SL series: 16
Reference
Page 35
Maximum number of display
(without a signal splitter)
9
25
PL series: 12
SL series: 25
Video wall installation guide 29