BenQ PL460 Installation Handbook page 22

Checking the safe distance between displays
During video wall installation, you might want to place the displays as close to each other as
possible. Note the LCD screens may be damaged through the direct transfer of weight if an
appropriate distance is not kept between displays. The recommended gap between displays may
vary depending on your purchased models as listed below.
Model name
P Series
Actual bezel-to-bezel dimensions may exceed the listed minimum values (5.4mm for
PH460/PL460 and 3.5mm for PL550/PL490/PL552) due to different tiling methods.
You are provided with gap inspection pads to ensure appropriate space between the cascaded
displays during video wall installation.
1. Get one of the provided gap inspection
pads and fold it as illustrated.
Adhesive tape with peeling sheet
3. Stick the pad to the edge where another display will be stacked as illustrated. Each edge
should have 3 gap inspection pads attached.
22 Video wall installation guide
Recommended gap between displays
≥ 0.5 mm
2. Remove the peeling sheet from the gap
inspection pad.
Front panel