Location And Function Of Parts And Controls; Front - Sony LS42X Operating Instructions Manual

010COV.book Page 9 Monday, October 12, 2009 4:42 PM

Location and Function of Parts and Controls

Front

Parts
1 1 (power/stand by)
indicator
2 Remote control sensor
Description
• Lights up in green when the display is switched on.
• Lights up in red when the display is in standby mode. Lights up in orange when the
display enters the power saving mode while a signal is input from a PC.
When the 1 indicator blinks in red, see page 32.
Note
When the "LED" option in the "Multi Display" settings is set to "Off" and the "Position"
option is not set to the right-bottom, the indicator does not light up in green even when the
display is turned on, except for the case of no signal or an unsupported signal.
Remote control light receptor.
GB
9
GB
FWD-S42E1
4-160-338-01(1)