Video Recording
To record:
1.
Pull the primary trigger to start recording. The r icon shows in the upper
left corner or the display and the recording time graphic at the bottom of
the display shows the remaining time.
2.
Pull the primary trigger to pause recording. The p icon shows in the
upper left corner or the display.
3.
Push to end the recording session.
4.
Push to save the video file. The Imager displays the VIDEO menu
as a prompt to disable the feature or continue in the same mode.
Video Playback
To playback:
1.
Push .
2.
Push / to highlight Memory.
3.
Push to view the thumbnails of saved files.
4.
Push to highlight a file for playback. All .avi files show
the k icon in the upper right corner of the thumbnail.
5.
Push to set a file for playback.
6.
Push to start the playback. The i icon shows in the upper left
corner of the display if an audio file is attached to the video file.
7.
During playback, push or for fast forward and rewind. Push
to continue normal playback.
8.
Push to exit the playback mode.
Shop for Fluke products online at:
Performance Series Thermal Imagers
MyFlukeStore
www.
Menus
1.888.610.7664
.com
43