Seagate ST1000LX000 Product Manual page 13

Table 4 DC Power Requirements
Power Dissipation
Spinup (max)
Seek average
Write average
Read average
(1)
Idle, performance
Idle, active
Idle, low power mode
(2)
Standby
Sleep
1. During periods of drive idle, some offline activity may occur according to the S.M.A.R.T.
specification, which may increase acoustic and power to operational levels.
2. Standby power is measured at steady state (after 200ms from transition)
2.7.1.1 Typical current profiles
The typical 5V startup and operation current profile is shown in
Figure 1 Typical 5V Startup and Operation Current Profile
Seagate Laptop SSHD SATA Product Manual, Rev. M
+5V input average (25° C)
1.50A
2.7W
3.7W
3.1W
2.2W
1.1W
0.9W
0.53W
0.53W
Figure 1.
Drive Specifications
12