Seagate ST1000LX000 Product Manual page 10

Table 1 Drive Specifications Summary (continued)
Drive Specification
Relative humidity gradient
Wet bulb temperature (max)
Altitude, operating
Altitude, nonoperating
(below mean sea level, max)
Operational Shock
Non-Operational Shock
Vibration, operating
Vibration, nonoperating
Nonrecoverable read errors
Annualized Failure Rate (AFR)
Rated workload
Warranty
Load-unload cycles
Supports Hotplug operation per the
Serial ATA Revision 3.2 specification
1. One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting.
Seagate Laptop SSHD SATA Product Manual, Rev. M
ST1000LX000 ST1000LX001
–304.8 m to 3048 m (–1000 ft to 10,000+ ft)
–304.8 m to 12,192 m (–1000 ft to 40,000+ ft)
Average annualized workload rating: <55 TB/year.
The AFR specification for the product assumes the I/O workload does not exceed the aver-
age annualized workload rate limit of 55 TB/year. Workloads exceeding the annualized rate
may degrade the product AFR and impact reliability as experienced by the particular
application. The average annualized workload rate limit is in units of TB per calendar year.
To determine the warranty for a specific drive, use a web browser to access the following
web page: http://www.seagate.com/support/warranty-and-replacements/
From this page, click on the "Is my Drive under Warranty" link. Users will be asked to pro-
vide the drive serial number, model number (or part number) and country of purchase.
The system will display the warranty information for the drive.
ST1000LM014,
ST1000LM015
ST1000LM028
30% per hour max
37.7°C max (operating)
40.0°C max (nonoperating)
350 Gs at 2 ms max
1000 Gs at 1 ms max
5–200 Hz: 2.0 Gs
201–500 Hz: 1.0 Gs
5–500 Hz: 5.0 Gs
15
1 per 10 bits read
1%
600,000 at 25°C, 50% rel. humidity
Yes
Drive Specifications
ST750LM000
9