Meat Probe - AEG COMPETENCE B9820-4-M Installation And Operating Instructions Manual

INTERVAL PLUS and INTERVAL STEAM
The continual change from fan to steam takes place automatically, with
INTERVAL PLUS however with a greater percentage of steam.
1. Do not pour water directly into the steam generator, but into the
drawer in the control panel.
2. Switch on the appliance using the ON/OFF
3. Using the arrow buttons
or , select the oven func-
tion INTERVAL PLUS or IN-
TERVAL STEAM and using
the or
the desired temperature.
4. Using the SELECTION
button, select the function DURATION
or button, set the desired cooking time or switch-off time.
Then proceed as for VIGOROUS STEAM.

Meat Probe

3
When the meat probe is plugged in, the OVEN FUNCTIONS menu offers
a choice of suitable oven functions and additional programmes for the
meat probe.
1
Important: Only the meat probe supplied may be used. If replacing,
please use only original replacement parts.
Inserting the meat probe
1. Switch on the appliance using the ON/OFF
2. Push the tip of the meat probe into
the meat as fully as possible, so that
the tip is in the centre of the meat.
3. Insert the meat probe plug into the
socket on the side wall of the oven
as far as it will go.
button, select
wP m ¸¹º»¼-+
button.
____________________
INTERVAL PLUS
ý ý ý ýþ ýþ ý
110û c þÝÜÜÜþ1ü 2 . 2 ü 5
or END
button.
í î
ý
ý
ý ý
ý
00. 0 ü 0
and using the
25