Manual Port Selection
With manual port selection you simply press the appropriate port selection
switch on the unit's front panel to give the KVM focus to its corresponding
port. The port's Port LED lights to indicate that it has the KVM focus.
Pressing and holding buttons 1 and 2 for more than 3 seconds invokes
Auto Scan Mode. Auto Scan Mode allows you to automatically cycle
through the ports at regular 5 seconds intervals so that you can monitor the
computer activity without having to constantly switch ports yourself.
When a port is being accessed under Auto Scan Mode, its corresponding
Port LED flashes.
While Auto Scan Mode is in effect, ordinary keyboard and mouse
functions are suspended. You must exit Auto Scan Mode in order to regain
normal control of their use.
To exit Auto Scan Mode, press any port selection switch. The KVM focus
goes to the port that corresponds to the switch you pressed.
Chapter 3.
Operation
11