User Settings - LG LW9226 Series Owner's Manual

IP list
› Basic policy: Select the basic policy type.
- Allow all: Allow all the IP address basically, but
the IP addresses in the list are denied.
- Deny all: Deny all the IP address basically, but
the IP addresses in the list are allowed. It needs
at least one IP address to activate this function.
• Save: Click this button to confirm the settings.
• Add: Click this button to add the IP address.
1. Click the [Add] button.
2. Set the IP options.
- Alias: Enter the alias.
- From: Enter the start IP address for the IP
filtering.
- To: Enter the end IP address for the IP filtering.
NOTE
If you want to deny or to allow a range of IP
addresses, enter the start IP address to "From"
and the end IP address to "To". You can also add
an IP address by entering the same IP address to
"From" and "To".
3. Click the [Save] button.
4. Repeat the steps 1 to 3 to add additional IP
address.
• Remove: Click this button to delete the IP address.
1. Select the alias from the list.
2. Click the [Remove] button. The IP address will be
deleted.

User settings

Basic
The IP device is shipped with the login rights of
administrator only. If others need to access the IP device
excluding the configuration a login with viewer rights need
to be created. A maximum of 50 users can be created.
User list
› Add the User
You can register a new user with various access
rights.
1. Click the [Add] button. User setting dialog is
displayed.
2. Enter the new User ID and Password. (Should
have a minimum of 4 characters and preferably
a combination of alphanumeric).
3. To confirm the password, retype the password
that you typed in the Password box.
4. Select the authority from the drop down list
to provide the access rights to each user and
then click the [Save] to confirm your selection.
- Administrator: Allows you to operate setup
menus and to view live images.
- Power user: Use of the limited functions
of the system (The Configuration menu is
not allowed.) A power user can use the Live
View, OSD control and audio functions.
- Normal user: Provides the lowest level of
access, Allows to view live images only.
Operation and settings 37
4