Table of Contents
Advertisement
Operation and settings
IP list
>
Basic policy: Select the basic policy type.
-
Allow all: Allow all the IP address basi-
cally, but the IP addresses in the list are
denied.
-
Deny all: Deny all the IP address basi-
cally, but the IP addresses in the list are
allowed. It needs at least one IP address
to activate this function.
•
Save: Click this button to confirm the settings.
•
Add: Click this button to add the IP address.
1.
Click the [Add] button.
2.
Set the IP options.
-
Alias: Enter the alias.
-
From: Enter the start IP address for the
IP filtering.
-
To: Enter the end IP address for the IP
filtering.
Note:
If you want to deny or to allow a range of
IP addresses, enter the start IP address to
"From" and the end IP address to "To". You
can also add an IP address by entering the
same IP address to "From" and "To".
3.
Click the [Save] button.
4.
Repeat the steps 1 to 3 to add additional IP
address.
•
Remove: Click this button to delete the IP
address.
1.
Select the alias from the list.
2.
Click the [Remove] button. The IP address
will be deleted.
User settings
Basic
The default user ID of this IP device are [admin]
(Administrator) and [anonymous] (Custom user). If your
user ID is registered as an administrator, you can register
a new user and provide the access rights for each user. A
maximum of 50 users can be created.
37
Advertisement
Table of Contents
