Connecting Network - LG LW9226 Series Owner's Manual

ALARM OUT [NC2]
G
NC
H
PORT B of the LW9228I/9226I series
Description
ALARM OUT [NC1]
ALARM OUT [COM1]
ALARM OUT [NO1]
NC
ALARM OUT [NC2]
ALARM OUT [COM2]
ALARM OUT [NO2]
NC
PORT B of the LW9228/9226 series
Description
ALARM OUT [NO1]
ALARM OUT [COM1]
ALARM OUT [NC1]
NC
ALARM OUT [NO2]
ALARM OUT [COM2]
ALARM OUT [NC2]
NC
CAUTION
Output specifications are lowactive, open-collector and
a drive capacity of 30 V DC 0.5 A maximum.
Connecting the alarm out incorrectly may cause
damaging the camera.

Connecting Network

Blue
You can control and monitor the system via network.
Brown
With the remote control (monitoring), you can change
the system configuration or monitor the image via net-
work. After the installation, check the network settings
for the remote control and monitoring work.
Connect the IP camera to your network using a standard
Color
RJ-45 network cable as shown below.
Blue
Violet
Brown
Gray
Orange
Black
Color
White Blue
Beige
Black
Brown
Red
Orange
Installation 15
3