Quick Reference Table - Supermicro X11SCH-LN4F User Manual

Quick Reference Table

Jumper Description
JBT1 CMOS Clear
JPG1 VGA Enable
JPME2 ME Manufacturing Mode
JWD1 Watchdog Timer
LED Description
LE1 Unit Identifier (UID) LED
LEDBMC BMC Heartbeat LED
LEDPWR Onboard Power LED
LEDSSD1, LEDSSD2 M.2 LED
Connector Description
BT1 Onboard Battery
COM1, COM2 COM Port, COM Header
FAN1 ~ FAN4
CPU/System Fan Headers
FANA, FANB
IPMI_LAN Dedicated IPMI LAN Port
Intel® PCH SATA 3.0 Ports (with RAID 0, 1, 5, 10)
I-SATA0 ~ I-SATA7
I-SATA6 and I-SATA7 supports SuperDOM
I-SGPIO1, I-SGPIO2 Serial Link General Purpose I/O Headers
JLD1 LAN3 Activity LED Connector (X11SCH-LN4F only)
JLD2 LAN4 Activity LED Connector (X11SCH-LN4F only)
Power LED Indicator/Speaker Header
JD1
(Pins 1-3: Power LED; Pins 4-7: Speaker)
JF1 Front Control Panel Header
JIPMB1 4-pin BMC External I
JL1 Chassis Intrusion Header
JOH1 Overheat/Fan Fail LED Header
JPI C1 Power I
2
JPWR1 24-pin ATX Power Supply Connector
JPWR2 8-pin Power Connector
JSD1, JSD2 SATA DOM Power Connectors
JSTBY1 Standby Power Header
JTPM1 Trusted Platform Module (TPM)/Port 80 Header
JUIDB1 Unit Identifier (UID) Switch
1GbE LAN Ports
LAN1 ~ LAN4 X11SCH-F Only: LAN1 ~ LAN2
X11SCH-LN4F Only: LAN1 ~ LAN4
Notes: The table above is continued on the next page.
C Header (for an IPMI card)
2
C System Management Bus (SMB) Header
2
13
Chapter 1: Introduction
Default Setting
Open (Normal)
Pins 1-2 (Enabled)
Pins 1-2 (Normal)
Pins 1-2 (Reset)
Status
Solid Blue: Unit Identified
Blinking Green: BMC Normal
Solid Green: Power On
Blinking Green: Device Working