Dimm Installation; Dimm Removal - Supermicro X11SCH-LN4F User Manual

Super X11SCH-F/-LN4F User's Manual

DIMM Installation

1. Insert the desired number of DIMMs
into the memory slots based on the
recommended DIMM population table on
page 30.
2. Push the release tabs outwards on both
ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the
module against the receptive points on the
ends of the slot.
5. Press the notches on both ends of the
module straight down into the slot until the
module snaps into place.
6. Press the release tabs to the lock positions
to secure the DIMM module into the slot.

DIMM Removal

Press both release tabs on the ends of the
DIMM socket to unlock it. Once the DIMM
module is loosened, remove it from the
memory slot.
LE1
MH13
ASpeed
AST2500
LEDBMC
MH12
JPME2
JD1
SP1
MH11
LEDSSD2
M.2-P_1
MH10
BT1
JBT1
USB4/5
Intel
C246
1
I-SATA0
M.2-P_2
I-SATA1
I-SATA2
I-SATA3
I-SATA4
JL1
JSD2
I-SATA5 JSD1
Release Tabs
32
COM1
VGA
FAN4
IPMI_LAN
LAN2/LAN4 LAN1/LAN3
USB0/1
Intel
Intel
i210
i210
CPU
MEGERAC
LICENSE
BAR CODE
MAC CODE
LEDSSD1
IPMI CODE
FANA
JSTBY1
FAN3
Notches
Press both notches
straight down into
the memory slot.