Using Display Customization; Configuring Eco-Settings - Lexmark MB2546 User Manual

Setting up and using the home screen applications
4
Type a unique shortcut name.
Note: To avoid clipped names on the home screen, type only up to 25 characters.
5
Touch OK.
The application automatically generates a unique shortcut number. To launch the shortcut, press # and then
the shortcut number.

Using Display Customization

Before using the application, make sure to do the following:
•
From the Embedded Web Server, click Apps > Display Customization > Configure.
•
Enable and configure the screen saver, slideshow, and wallpaper settings.
Managing screen saver and slide show images
1
From the Screen Saver and Slideshow Images section, add, edit, or delete an image.
Notes:
•
You can add up to 10 images.
•
When enabled, the status icons appear on the screen saver only when there are errors, warnings, or
cloud‑based notifications.
2
Apply the changes.
Changing the wallpaper image
1
From the home screen, touch Change Wallpaper.
2
Select an image to use.
3
Apply the changes.
Running a slide show from a flash drive
1
Insert a flash drive into the USB port.
2
From the home screen, touch Slideshow.
Images appear in alphabetical order.
Note: You can remove the flash drive after the slide show starts, but the images are not stored in the
printer. If the slide show stops, then insert the flash drive again to view the images.
Configuring Eco‑Settings
1
From the home screen, touch Eco‑Settings.
2
Configure Eco‑Mode or Schedule Power Modes.
3
Apply the changes.
18