Ricoh M C250FW User Manual page 429

The machine recovers from Energy Saver mode when it receives a print job, prints a received fax, or
when any key is pressed.
Energy Saver mode 1
The machine enters Energy Saver mode 1 if the machine has been idle for about 30 seconds. It
takes less time to recover from Energy Saver mode 1 than from power-off state or Energy Saver
mode 2, but power consumption is higher in Energy Saver mode 1 than in Energy Saver mode 2.
Energy Saver mode 2
The machine enters Energy Saver mode 2 after the period of time specified for this setting is
passed. Power consumption is lower in Energy Saver mode 2 than in Energy Saver mode 1, but it
takes longer to recover from Energy Saver mode 2 than from Energy Saver mode 1.
After printing in Energy Saver mode 2, the power is turned off without waiting for 1 minute.
Specifications
Energy Saver mode 1
Energy Saver mode 2
*2
Duplex Function
*1 Recovery time and power consumption may differ depending on the conditions and environment of the
machine.
*2 Achieves ENERGY STAR energy savings; product fully qualifies when packaged with (or used with) a
duplex tray and the duplex function is enabled as an option.
For details about Energy Saver modes, see page 251 "Administrator Tools Settings".
• If the machine is in Energy Saver mode for 24 hours continuously, the machine automatically
returns to normal state and performs self-maintenance.
• (mainly Europe)
*1
Power Consumption
Default Time
*1
Recovery Time
*1
Power Consumption
Default Time
*1
Recovery Time
Information for This Machine
26.5 W
26.9 W
30 seconds
10 seconds or less
0.74 W
0.70 W
1 minute
12 seconds
Standard
427