Ricoh M C250FW User Manual page 42

1. Guide to the Machine
Current job
Mobile printing (from a
device)
*1 Printing starts after scanning is finished if [Gradation:] is set to [Standard] or [Fine] (PCL printer driver), or
when printing from the PostScript 3 printer driver.
*2 Scanning is not possible if [Gradation:] is set to [Standard] or [Fine] (PCL printer driver), or when printing
from the PostScript 3 printer driver.
*3 Fax transmission is not possible if [Gradation:] is set to [Fine] (PCL printer driver), or when printing from the
PostScript 3 printer driver.
*4 Printing may be canceled if [Gradation:] is set to [Standard] or [Fine] (PCL printer driver), or when printing
from the PostScript 3 printer driver.
*5 Fax printing may take longer than normal if you scan using the control panel at the same time, especially
when scanning multiple pages using the exposure glass.
*6 Multi-access is possible when each job is performed using the exposure glass or ADF on the M C250FWB.
Multi-access is not possible when each job is performed using the exposure glass or ADF on the M C250FW.
*7 Internet faxes that are received cannot be printed.
*8 Simultaneous processing is possible only when the current job is to receive an Internet fax but not to print it.
• If you try to use a function that cannot be performed simultaneously, you will hear a beep sound
from the machine or see a failure message pop up on your computer screen. In this case, try again
after the current job is finished.
40
Types of jobs that can be executed simultaneously
• Fax memory transmission
*7
• Internet Fax reception
• Fax memory reception
*6
• Scanning
• Fax immediate transmission
• Internet Fax transmission
*6
*6