Connecting The Machine To A Wireless Network; Using The Wi-Fi Setup Wizard - Ricoh M C250FW User Manual

Connecting the Machine to a Wireless Network

There are four methods for connecting the machine to a wireless network:

• Using the Wi-Fi Setup Wizard

See page 393 "Using the Wi-Fi Setup Wizard".
• Using the WPS button
See page 394 "Using the WPS Button".
• Using a PIN code
See page 396 "Using a PIN Code".
• Using the Wi-Fi Direct
See Wi-Fi Direct Guide.
Using the Wi-Fi Setup Wizard
A router (access point) is needed to set up a connection.
Checking the SSID and encryption key
The SSID and Encryption key for the router (access point) may be printed on a label affixed to the
router (access point). For details about the SSID and Encryption key, refer to the router (access
point) manual.
Configuring settings using the control panel
Make sure the Ethernet cable is not connected to the machine.
1. Check that the router (access point) is working correctly.
When selecting [Detailed Setup], proceed to step 10.
2. Press the [Home] key.
3. Press the [Setting] icon on the [Home] screen.
4. Press [Network Settings].
Connecting the Machine to a Wireless Network
ECC202
393