When You Cannot Make Copies As Wanted - Ricoh M C250FW User Manual

Problem
When copying from the exposure
glass, the print area of the copy is
out of alignment with the original.

When You Cannot Make Copies as Wanted

Problem
Photocopied pages are not in
correct order.
Copied pages are too dark or too
light.
Cannot make copies with
satisfactory tones.
Place the original copy side down, making sure that it is
aligned to the rear left corner and pressed flat against the
exposure glass.
On the control panel, change the [Sort] setting under copy
settings to collate pages as you require. For details about
[Sort], see page 217 "Copier Settings".
Adjust the image density. See page 120 "Adjusting Image
Density".
Adjust the tone in [Color Adjustment] in [Copier Settings]. You
can adjust the intensity of red, green and blue. See page 217
"Copier Settings".
Copier Problems
Solution
Solution
377