Ricoh M C250FW User Manual page 139

2. Enter the command "ipconfig /all", and then press the [Enter] key.
3. Confirm the name of the computer, the active settings of the DHCP server, and the IPv4
address, and then write them in [1] on the check sheet.
The computer's name is displayed under [Host Name].
The address displayed under [IPv4 Address] is the IPv4 address of the computer.
Active settings of DHCP server are displayed under [DHCP Enabled].
4. Next, enter the command "set user", and then press the [Enter] key.
Be sure to put a space between "set" and "user".
5. Confirm the domain name/working group name and the user name, and then write them
in [2] on the check sheet.
The user name is displayed under [USERNAME].
Confirm the computer's login password and write it in [3] on the check sheet.
Next, create a shared folder on a computer. For details about creating a shared folder, see page 138
" Creating a Shared Folder on a Computer".
• Depending on the operating system or security settings, it might be possible to specify a user name
that does not have a password assigned. However, we recommend that for greater security you
select a user name that has a password.
Confirming the User Name and Computer Name When Running OS X/macOS
Confirm the user name and the name of the computer you will send scanned documents to. Confirm the
values, and then write them on the check sheet.
1. On the Apple menu, click [About This Mac].
The computer's information screen appears.
2. Click [System Report...].
3. In the left pane, click [Software], and then confirm the computer name and user name
under "System Software Overview:".
The computer name is displayed next to [Computer Name].
The user name is displayed next to [User Name].
On the check sheet, write the computer name in [1] and the user name in [2].
Next, create a shared folder on a computer. For details about creating a shared folder, see page 138
" Creating a Shared Folder on a Computer".
Basic Operation of Scan to Folder
137