Table of Contents
Advertisement
15
Using the Main Menu
15.6 Device
The Device menu allows you to configure and format hard drives.
15.6.1 Formatting the Hard Drive
CAUTION
Formatting the HDD erases all data on the hard disk. This step cannot be undone.
1. Select the HDD tab.
2. Click the checkbox under Select to choose the drive you wish to reformat.
3. Click Format HDD.
4. When the warning window appears, click OK. Wait for the system to format the hard
drive.
15.6.2 Configuring Overwrite
If Overwrite recording is enabled, the system's hard drive automatically re-writes the hard
drive's oldest content (first in first out). Otherwise, the system will stop recording when the
hard drive is full.
To configure Overwrite:
50
#LX400080; r.40436/40436; en-US
Advertisement
Table of Contents
Troubleshooting
