Rj45 Lan Ports; Usb Ports - DFI CS330 User Manual

RJ45 LAN Ports

LAN 1 LAN 2
CS330-H310 LAN 1
LAN 2
LAN 2
LAN 1
CS330-Q370
Features
• 1 Intel I211AT PCIe
®
• 1 Intel ® I219V PCIe (CS330-H310)
• 1 Intel I219LM PCIe with iAMT12.0 (CS330-Q370)
®
The LAN ports allow the system board to connect to a local area network by means of a
network hub.
BIOS Setting
Configure the onboard LAN ports in the Chipset menu ("PCH-IO Configuration" submenu) of
the BIOS. Refer to the chapter 3 for more information.
Driver Installation
Install the LAN drivers. Refer to the chapter 4 for more information.
Chapter 2 Hardware Installation
Chapter 2

USB Ports

USB 6
USB 5
USB 2.0
USB 4
USB 2
USB 3
USB 1
USB 3.1 Gen 1
USB 3.1 Gen 1
CS330-H310
USB 4
USB 2
USB 3
USB 1
USB 3.1 Gen 1 UBS 3.1 Gen 2
CS330-Q370
The USB device allows data exchange between your computer and a wide range of simultane-
ously accessible external Plug and Play peripherals.
The system board is equipped with 2 onboard USB 2.0 ports (USB 5-6), 4 onboard USB 3.1
Gen 1 ports (USB 1-2/3-4) for CS330-H310, 2 onboard USB 3.1 Gen 1 ports (USB 1-2) for
CS330-Q370 and 2 onboard USB 3.1 Gen 2 ports (USB 3-4) for CS330-Q370. The 10-pin con-
nectors allow you to connect 4 additional USB 2.0 ports (USB 7-8/9-14). The 20-pin connector
allows you to connect 2 additional USB 3.1 Gen 1 ports (USB 5-6) for CS330-Q370. The ad-
ditional USB ports may be mounted on a card-edge bracket. Install the card-edge bracket to
an available slot at the rear of the system chassis and then insert the USB port cables to a
connector.
21
USB 7-8
USB 5-6 10
USB 9-14
USB 3.1 Gen 1
or optional
(for CS330-Q370 only)
vertical USB
9 1
2
USB 2.0
www.dfi.com