Enterasys RoamAbout RBT-8100 Installation Manual page 30

Mid-Mounting in a Two-Post Rack System
Figure 2-9
3. Install the chassis in a rack as shown in Figure
a.
b. Position the chassis so that the L brackets (A) are inserted into the chassis mounting
c.
2-8 Bracket Kit Installation
Attaching L Brackets to a Center Post
B
A
Caution: To help prevent personal injury, at least two people are required to lift the chassis into
the rack.
Advertencia: Para ayudar a prevenir alguna lesión personal, al menos dos personas son
requeridas para levantar el chasis y meterlo al rack.
Warnhinweis: Zum Schutz vor körperlichen Schäden, sollten sie mit min. zwei Personen das
Chassis in das Rack heben.
Locate one person at the front of the rack and one at the rear.
brackets (B).
While supporting the weight of the chassis, adjust the L brackets to fit tightly into the
chassis brackets (C).
A. L bracket
B. Screws (supplied by your rack manufacturer)
C. Front side of typical right center post
C
2‐10.