Removing Continuous Forms - Oki 6300FB User Manual

2.
Check the position of the tear-off perforations (1) relative to the
paper cutter (2). (Paper Tray (3) is shown for clarity.)
(a)
(b)
Note
If a movement greater than +- 7/90 in is specified, the QUIet indicator
blinks and the above adjustment cannot be made.
3.
Release the buttons after the tear-off perforations have been
aligned with the paper cutter.
R
emoving continuous forms
1.
Tear off the continuous forms.
on page 24.
2.
Press the SEL button to set the printer off-line and reposition the
continuous forms in the printer.
3.
Press the PARK button to move the front edge of the continuous
forms backwards to the Pin Tractors.
Note
the ALARM indicator illuminates to indicate there is no paper present.
If sprocket holes of the last page of the forms disengage from the
sprocket pins, do not attempt to eject the paper to avoid the possibility
of a paper jam.
3
To advance the forms, hold down the TEAR button and
press the FF/LOAD button.
To retract the forms, hold down the TEAR button and press
the LF button.
Paper handling > 25
2
1
See "Tearing off continuous forms"